e-05selphy square qx10

Canon SELPHY Square QX10 error E-05: Solution

The Canon SELPHY Square QX10 error E-05 indicates a problem with ink cartridge detection. This occurs when the device fails to identify the consumables. A simple reseat of the ink ribbon is typically enough to clear this error.

1 views

Common causes

  • 1Poor installation
  • 2Dirty sensor
  • 3Empty cartridge
  • 4Loose locking mechanism

Solutions

Quick Diagnosis

The E-05 error occurs if the ink cartridge is not locked properly. Inspect the cartridge compartment for dust or debris.

Step-by-Step Solution

  1. Power Off: Switch off the printer.
  2. Remove: Take out the ink cartridge.
  3. Reinstall: Reinsert until a click is heard.
  4. Test: Turn back on.

Prevention and Maintenance

Store in a case when not in use. Use only XS-20L supplies.

When to Call a Technician

If the issue persists, the internal sensor might be faulty.

Device Technical Specifications

  • Technology: Dye-Sublimation
  • Connectivity: Bluetooth
  • Compatible Consumable: XS-20L Series
  • Recommended Use: Portable photo printing
  • Drivers / Firmware

Steps to follow

  1. 1

    Power Off

    Switch off.

  2. 2

    Remove

    Extract cartridge.

  3. 3

    Reinstall

    Snap into place.

  4. 4

    Test

    Turn back on.

Frequently asked questions

It indicates a failure in detecting the ink cartridge.

Use XS-20L original for optimal results.

No, it's usually an installation issue.

Clean with a soft dry cloth.