e-03CM1100ADW

Error E-03 Pantum CM1100ADW: Quick Fix

The Pantum CM1100ADW error E-03 alerts the user that a paper jam has occurred within the printing mechanism. The output sensor failed to receive the pass signal in time, causing the system to halt to protect the transfer rollers. It is a common issue requiring simple visual inspection.

1 views

Common causes

  • 1Incorrect paper placement.
  • 2Damp paper sticking to rollers.
  • 3Debris or label bits inside.
  • 4Separator roller wear.

Solutions

Quick Diagnosis

The E-03 shows on the LCD panel alongside a "Paper Jam" notification. Check the rear area for crumpled paper.

Step-by-step fix

  1. Open the front door and remove the toner cartridge.
  2. Verify the path from input tray to output.
  3. Remove any paper fragments.
  4. Close the door and wait for initialization.

Prevention

Use high-quality paper and ensure tray guides aren't too tight. Clean rubber rollers every 5,000 pages.

When to call a pro

If E-03 persists after cleaning, the paper sensor may be blocked or faulty.

Technical Data

  • Technology: Color Laser MFP
  • Speed: 18 ppm
  • Connectivity: Wi-Fi, USB, LAN
  • Consumables: CTL-1100 Series
  • Usage: Small Office
  • Official Drivers / Firmware

Steps to follow

  1. 1

    Open doors

    Open front and rear doors.

  2. 2

    Extract paper

    Pull gently to avoid tearing.

  3. 3

    Restart

    System will auto-restart.

Frequently asked questions

The pass sensor detects an obstruction.

Yes, forcing paper can damage output sensors.

CTL-1100 series.

Check tray alignment.