e-03EcoTank ET-2650

Epson EcoTank ET-2650 Error E-03: Technical Fix

The Epson EcoTank ET-2650 error E-03 is a common alert indicating an obstacle in the paper path. When the feed rollers do not detect the correct advance, the printer locks automatically. To fix the error E-03 on Epson EcoTank ET-2650, the user must check the feed area and the print head rail for paper residue or labels. It is an inkjet printer designed for intensive home use.

1 views

Common causes

  • 1Paper scraps caught in the head rail.
  • 2Dirty or worn pick-up rollers.
  • 3Protective tape left behind during installation.
  • 4Using paper out of specification (too thick).

Solutions

Quick Diagnosis

The E-03 is recognized by the print carriage moving to one side and stopping. If you observe the printer trying to pull paper but failing, the issue is with the pick-up rollers, which may be dirty or worn.

Step-by-step Solution

  1. Turn off the printer immediately.
  2. Lift the scanner cover and check for scraps of paper on the central rail.
  3. Check the rear input tray and remove the paper to clean the rollers with a damp cloth.
  4. Close everything, power on, and perform a test print.

Prevention and Maintenance

Avoid using thick paper or paper with stickers. Regular cleaning with a slightly damp swab on the rollers will prevent dust buildup and jams.

When to Call a Technician

If you find no paper and the carriage is still blocked with the E-03 error, the drive belt may have slipped off its rail, which requires internal repair.

Equipment Data Sheet

  • Technology: Inkjet (EcoTank)
  • Speed/Performance: Up to 33 ppm (draft)
  • Connectivity: Wi-Fi, USB
  • Feed Capacity: 100 sheets
  • Compatible Consumable: Epson 664 series inks
  • Recommended Use: Home and small offices
  • Official drivers / firmware

Steps to follow

  1. 1

    Open cover

    Turn off the printer and open the scanner unit to access the print carriage.

  2. 2

    Remove paper

    Carefully search for any paper residue blocking the print head path.

  3. 3

    Clean sensors

    Use a lightly dampened cloth to clean the visible feed rollers.

Frequently asked questions

This error specifically signals a paper jam, which prevents the print carriage from moving freely along its rail.

Yes, turning off the device is mandatory to avoid mechanical damage to the head motor while you remove the jammed paper.

It uses 664 series ink bottles, which are essential for maintaining the life of the piezoelectric print heads.

We recommend roller cleaning every 5,000 pages or whenever paper feeding becomes erratic.