e-03DS-770

Epson DS-770 Error E-03: ADF Jammed

The Epson DS-770 error E-03 typically points to a mechanical obstruction within the ADF or a failure in the document sensing path.

1 views

Common causes

  • 1Staples in the input documents.
  • 2Adhesive residue on the rollers.
  • 3Sensor failure.
  • 4Debris in the ADF channel.

Solutions

Diagnóstico rápido

If the ADF cover is properly closed but the scanner reports E-03, verify if the feed sensors are obstructed by dust or paper shards.

Solución paso a paso

  1. Open the ADF tray.
  2. Gently remove any obstructions.
  3. Clean the pickup rollers.
  4. Reset the scanner power.

Prevención y mantenimiento

Keep the paper path clean and ensure your original documents have no staples.

Cuándo llamar a un técnico

If the error E-03 persists after sensor cleaning, there might be internal hardware damage.

Ficha técnica del equipo

Steps to follow

  1. 1

    Open ADF

    Release the latch.

  2. 2

    Clear Obstructions

    Remove paper gently.

  3. 3

    Clean Rollers

    Use a lint-free cloth.

Frequently asked questions

An ADF jam detection code.

It is a standard jam warning.

Original roller kits are best.

Clean sensors monthly.