e-0202CM1100ADN

Pantum CM1100ADN Error E-0202: Paper Jam Fix

The Pantum CM1100ADN error E-0202 indicates a physical paper obstruction within the printing mechanism. This error stops the printing sequence, and manual inspection is required to restore function. Follow these instructions to safely remove the obstruction and verify that your feeding system is clear.

1 views

Common causes

  • 1Misaligned paper in the tray.
  • 2Using incorrect paper weight/types.
  • 3Debris or torn paper bits in the sensor.
  • 4Worn or dirty rubber feed rollers.

Solutions

Diagnóstico rápido

If you see the Pantum CM1100ADN error E-0202, check for visible paper remnants in the rear or front feed sections. The sensor relies on clear passage; any obstruction will trigger the fault code immediately.

Solución paso a paso

  1. Power off the printer to ensure no mechanical tension is present.
  2. Open all service covers, including the toner compartment.
  3. Locate the paper and pull it slowly in the normal exit direction.
  4. Inspect the feed rollers for dust or paper scrap buildup.

Prevención y mantenimiento

Avoid using crumpled or damp paper. Clean the rollers with a lint-free cloth every few thousand prints. Proper alignment in the tray helps ensure smooth operation.

Cuándo llamar a un técnico

If the error code persists while the path is clearly empty, a failing paper sensor or actuator may require professional servicing.

Ficha técnica del equipo

  • Technology: Color Laser
  • Speed: 18 ppm
  • Connectivity: USB / LAN
  • Feeding Capacity: 250 sheets
  • Compatible Consumables: TL-110 Series
  • Recommended Use: Home office
  • Official drivers / firmware

Steps to follow

  1. 1

    Open Cover

    Open the front door and carefully remove the toner cartridge.

  2. 2

    Extract Paper

    Gently pull the jammed paper following the print path.

  3. 3

    Clear Debris

    Check the rollers for any torn pieces of paper.

Frequently asked questions

This code represents a physical paper jam. It often happens due to misaligned paper, humidity, or dirty feeding rollers.

No, pulling forcefully may damage the internal sensors or feed rollers. Always pull gently and evenly.

This unit requires TL-110 series consumables. Improperly seated toner can sometimes interfere with paper path flow.

Use quality paper, keep the tray guides aligned, and store paper in a dry, cool environment.

Pantum CM1100ADN Error E-0202: Paper Jam Fix | Vimazdev