Konica Minolta PagePro 1590MF error E-02: Fix
The Konica Minolta PagePro 1590MF error E-02 is a status code indicating a fault in the scanner unit. Usually, this occurs when the carriage fails to complete its initial calibration routine. By following these steps, you can fix the error E-02 in PagePro 1590MF and restore the printer's document management capabilities.
Common causes
- 1Calibration sensor failure.
- 2Mechanical blockage of the scan carriage.
- 3Faulty scanner lamp or light source.
- 4Damaged scanner ribbon cable.
Solutions
Diagnóstico rápido
If you hear grinding sounds coming from the scanner bed area, the carriage is likely misaligned or stuck.Solución paso a paso
- Power Cycle: Turn off and unplug the machine completely.
- Visual Inspection: Verify no debris is preventing the scanner carriage from moving.
- System Reset: Power up again and watch for the carriage to move and calibrate.
- Verification: Perform a scan to confirm system functionality.
Prevención y mantenimiento
Keep the scanner glass clean. Avoid placing heavy items on the lid to protect the internal alignment.Cuándo llamar a un técnico
If the carriage motor shows no signs of movement despite multiple restarts, professional repair is required.Ficha técnica del equipo
- Technology: Monochrome laser
- Speed: 20 ppm
- Scanner: 600x600 dpi resolution
- Compatible Consumables: PagePro 1590 toner
- Recommended Use: Small office
- Official drivers/firmware
Steps to follow
- 1
Restart
Power off and unplug the device for at least one minute.
- 2
Inspect
Ensure the scanner carriage has no physical obstructions.
- 3
Clean
Wipe the scanner glass with a dry, lint-free cloth.
Frequently asked questions
Restart the machine to recalibrate. If it fails, check the scanner bed for debris or obstructions.
Often yes, specifically regarding the motor assembly or scanner lamp connection.
No, this is strictly a scanner system error.
Monthly cleaning prevents dust from triggering false errors and helps overall print quality.