e-02PC42t Plus IV

Error E-02 Honeywell PC42t Plus IV: Ribbon Out Fix

The Honeywell PC42t Plus IV error E-02 is a standard warning that the thermal transfer ribbon is empty or broken. Users often ask why is my Honeywell PC42t Plus IV showing error E-02? because the ribbon sensor is sensitive to debris.

1 views

Common causes

  • 1Empty ribbon
  • 2Torn ribbon
  • 3Dirty sensor
  • 4Incorrect tension

Solutions

Diagnóstico rápido

The status light flashes red indicating the ribbon sensor is not detecting the tape surface.

Solución paso a paso

  1. Open the printer cover.
  2. Replace the empty ribbon roll.
  3. Re-thread and close the cover.

Prevención y mantenimiento

Clean the sensor monthly with alcohol.

Cuándo llamar a un técnico

If replacing the ribbon doesn't help, the sensor might need calibration.

Ficha técnica del equipo

  • Technology: Thermal Transfer
  • Speed: 101.6 mm/s
  • Connectivity: USB
  • Consumibles: 110mm width ribbon
  • Uso recomendado: Logistics
  • Official Drivers / Firmware
Error E-02 Honeywell PC42t Plus IV: Ribbon Out Fix | Vimazdev