e-0107fi-8170 Business Pro

Fujitsu fi-8170 Business Pro error E-0107: Causes & Fixes

The Fujitsu fi-8170 Business Pro error E-0107 indicates that the input tray sensors are struggling to acknowledge the loaded documents. This often happens due to misaligned paper guides or debris. What is the meaning of error E-0107 on fi-8170? It signifies an issue within the ADF document feed path.

1 views

Common causes

  • 1Misaligned side paper guides.
  • 2Document edge curling preventing trigger.
  • 3Adhesive residue on pickup rollers.
  • 4Sensor arm getting stuck.

Solutions

Quick Diagnosis

If the machine flags error E-0107, verify that your documents are not curled or wrinkled at the edges, as this prevents the paper presence sensor from triggering.

Step-by-step Solution

  1. Adjust the paper guides so they fit snugly against the document width without pressing too hard.
  2. Inspect the rollers for any glue residue or adhesive stickers from labels.
  3. Fan the documents before inserting them to ensure they feed smoothly.
  4. Restart your scanning application to refresh the hardware handshake.

Prevention and Maintenance

Keep the input tray area free of dust. Use compressed air periodically to clean the gaps between the feed rollers to ensure the sensors remain sensitive.

When to Call a Technician

If the error persists after checking paper alignment and performing a cleaning, a professional technician should inspect the internal sensor cable for potential disconnection.

Technical Data

  • Technology: ADF
  • Performance: 70 ppm
  • Connectivity: USB 3.2 / LAN
  • Consumables: Roller Exchange Kit PA03810-0001
  • Usage: Commercial
  • Official Drivers / Firmware

Steps to follow

  1. 1

    Check paper guide

    Adjust the paper guides so they fit snugly against the document width.

  2. 2

    Check rollers

    Inspect rollers for any glue residue or adhesive stickers.

  3. 3

    Reset software

    Restart your scanning application to refresh the hardware handshake.

Frequently asked questions

This error denotes a discrepancy in document detection or a failure in the input tray sensor activation.

It is better to clear the sensor area first; forcing scans may lead to premature roller wear.

Always use the official PA03810-0001 maintenance kit for consistent sensor performance.

Daily if you scan high volumes, or weekly for standard office usage to keep sensors responsive.

Fujitsu fi-8170 Business Pro error E-0107: Causes & Fixes | Vimazdev