e-010e-STUDIO 9008A

Toshiba e-STUDIO 9008A error E-010: Paper Jam Fix

Toshiba e-STUDIO 9008A error E-010 is a common notification concerning paper jams within the printer's transport system. This message prevents the device from continuing to print until the obstruction is cleared and the internal sensors return to their normal state. It is a routine fault that you can resolve following a few simple steps.

1 views

Common causes

  • 1Misaligned paper in the feed trays.
  • 2Accumulation of paper dust on the pickup rollers.
  • 3Paper weight outside of the printer's supported range.
  • 4Excessive moisture in the paper causing sheets to stick together.

Solutions

Diagnóstico rápido

Error E-010 usually displays with a clear indicator on the panel showing which area is jammed. If the machine halts during printing and doesn't make unusual noises, it's a standard jam that can be fixed manually.

Solución paso a paso

  1. Open trays: Open the side doors and input trays to locate the stuck paper.
  2. Remove paper: Gently pull the paper out in the direction of the roller rotation, taking care not to rip it.
  3. Restart: Close all covers; the machine will detect the change and clear the E-010 error automatically.

Prevención y mantenimiento

Fan the paper stack before loading to separate the sheets. Keep the feed rollers clean, as paper dust build-up is the primary reason for jams in high-speed printing.

Cuándo llamar a un técnico

If the E-010 error does not clear after removing all paper, a paper sensor might be stuck or faulty. In this case, stop and contact a technician to have the optical sensors checked properly.

Ficha técnica del equipo

  • Tecnología: Laser, xerography
  • Velocidad/rendimiento aproximado: 90 ppm
  • Conectividad: Ethernet 10/100/1000
  • Capacidad de alimentación: Multiple adjustable trays
  • Consumible compatible: T-9008E toner, feed rollers (maintenance kit)
  • Uso recomendado: High-volume printing
  • Drivers / firmware oficial

Steps to follow

  1. 1

    Open trays

    Open the side doors and input trays to locate the stuck paper.

  2. 2

    Remove paper

    Gently pull the paper out in the direction of the roller rotation, taking care not to rip it.

  3. 3

    Restart

    Close all covers; the machine will detect the change and clear the E-010 error automatically.

Frequently asked questions

The E-010 error indicates a physical obstruction or a blocked sensor due to a paper jam in the paper path.

No, remove the paper gently. Forcing it may damage the rollers or leave torn bits of paper inside, causing further errors.

Use standard weight paper (75-90 g/m²) and ensure it is properly aligned in the trays to avoid frequent jams.

Keep feed rollers clean and ensure your paper isn't damp or wrinkled before placing it into the trays.