Konica Minolta PagePro 1590MF error E-01: How to Fix
The Konica Minolta PagePro 1590MF error E-01 is a common system alert representing a temporary memory failure. It often occurs when the printer's processor is overwhelmed by complex documents or a corrupted queue. Following a simple restart process usually clears this code instantly.
Common causes
- 1Memory saturation
- 2Firmware conflict
- 3Corrupted PC print driver
- 4Print queue data error
Solutions
Quick Diagnosis
The Konica Minolta PagePro 1590MF error E-01 shows up as a constant error light. Check if this happens with every file or only with very large graphics.Step-by-step Solution
- Restart: Turn off the printer and disconnect the power cord for 60 seconds.
- Clear queue: Cancel all pending print jobs from your computer to clear memory.
- Check firmware: Visit the official website to check for any available firmware updates.
Prevention and Maintenance
Limit the number of simultaneous print jobs. Keeping the device firmware updated ensures better resource management.When to call a technician
If the machine is stuck in an E-01 state even after a restart, the main system board may have developed a fault.Equipment Data Sheet
- Technology: Laser
- Speed: 22 ppm
- Connectivity: USB 2.0
- Compatible Consumables: 1500 Toner Series
- Recommended Use: Small Office
- Official Drivers / Firmware
Steps to follow
- 1
Restart
Turn off the printer and disconnect the power cord for 60 seconds.
- 2
Clear queue
Cancel all pending print jobs from your computer to clear memory.
- 3
Check firmware
Visit the official website to check for any available firmware updates.
Frequently asked questions
Error E-01 represents a memory or processor crash that stops the printer from handling tasks correctly.
Performing a hard reset and clearing the print queue usually resolves this state.
This printer uses PagePro 1500 series toner cartridges.
Cleaning the pickup rollers during toner replacement significantly improves performance.