e-01magicolor 1690MF

Konica Minolta magicolor 1690MF error E-01: Fix it now

The Konica Minolta magicolor 1690MF error E-01 is a frequent alert related to the paper feed tray. This code triggers when the sensors fail to detect the tray or when an obstruction prevents paper loading. If you ask why is my Konica Minolta magicolor 1690MF showing error E-01?, the cause is usually related to paper alignment.

1 views

Common causes

  • 1Tray improperly seated in its track.
  • 2Paper guides adjusted too tightly.
  • 3Dirt buildup on the tray presence sensor.
  • 4Worn-out springs on the tray base that lift the paper stack.

Solutions

Quick Diagnosis

The E-01 error appears on the control panel when the paper tray fails to lock into place or paper is incorrectly positioned. You will notice this fault because the printer remains idle even after sending a print command.

Step-by-step fix

  1. Remove Tray: Pull out the main paper tray completely and inspect the cavity.
  2. Clean Sensors: Wipe the paper presence sensors with a clean, dry cloth.
  3. Adjust Paper: Ensure the paper guides are snug against the paper stack size.
  4. Reseat Tray: Reinsert the tray firmly until it clicks into place.

Prevention and maintenance

Do not overload the paper tray beyond the indicated fill line to avoid straining the rollers. Keep the tray area clean and free of dust. Using high-quality, straight paper significantly reduces E-01 incidents.

When to call a technician

If you have confirmed that the tray is properly placed and the E-01 code persists, the tray sensor might be electrically damaged or the pickup rollers may need professional replacement.

Ficha técnica del equipo

  • Technology: Color laser printer.
  • Speed/Performance: 20 pages per minute.
  • Connectivity: USB, network.
  • Input capacity: 200 sheets (main tray).
  • Compatible consumables: magicolor 1600 family toner (A0V30 series).
  • Recommended usage: Home/Small Office.
  • Official drivers / firmware

Steps to follow

  1. 1

    Remove Tray

    Pull out the main paper tray completely and inspect the cavity.

  2. 2

    Clean Sensors

    Wipe the paper presence sensors with a clean, dry cloth.

  3. 3

    Adjust Paper

    Ensure the paper guides are snug against the paper stack size.

  4. 4

    Reseat Tray

    Reinsert the tray firmly until it clicks into place.

Frequently asked questions

The E-01 error indicates a problem with the input tray, typically because the paper is misaligned or the paper sensor is blocked.

Yes, this error prevents the printer from picking up paper, effectively halting any printing or copying tasks.

Always use standard 80g office paper and ensure your toner cartridges are properly installed to avoid static interference.

You can use a cloth slightly dampened with distilled water to gently wipe the pickup rollers when you notice paper feed issues.

Konica Minolta magicolor 1690MF error E-01: Fix it now | Vimazdev