e-01EcoTank ET-2650

Epson EcoTank ET-2650 E-01 Error: Paper Jam Guide

The Epson EcoTank ET-2650 E-01 error is a warning indicating an internal paper jam. This code appears on the LCD panel when the paper feed rollers encounter resistance. It is often caused by debris or dust buildup on the rollers, making them unable to grab the paper efficiently.

1 views

Common causes

  • 1Paper loaded outside the alignment guides.
  • 2Worn-out rubber feed rollers with dust buildup.
  • 3Adhesive residue from labels inside the feed path.
  • 4Paper weight exceeding the tray's specification.

Solutions

Diagnóstico rápido

The E-01 code is simple: there is a blockage. If you hear rattling sounds, the rollers are slipping on debris. Check if paper is loaded squarely in the tray.

Solución paso a paso

  1. Check tray: Remove all paper and check for crumpled sheets.
  2. Internal inspection: Open the scanner unit and verify the carriage is unobstructed.
  3. Clean rollers: Wipe rubber rollers with a damp cloth to remove dust.
  4. Reset: Power off fully for 60 seconds.

Prevención y mantenimiento

Clean rollers regularly with isopropyl alcohol. Keep paper stored in a dry place. Use genuine Epson 664 ink to maintain nozzle health.

Cuándo llamar a un técnico

If the error persists after cleaning and resetting, the paper sensor may be physically broken or the printer's mainboard has failed.

Ficha técnica del equipo

  • Technology: MicroPiezo Inkjet
  • Resolution: Up to 5760 x 1440 dpi
  • Connectivity: Wi-Fi, USB 2.0
  • Compatible consumable: Epson T664 Ink Bottles
  • Recommended usage: High-volume home office
  • Official drivers / support

Steps to follow

  1. 1

    Check tray

    Clear the paper tray and check for any visible jammed sheets in the feed path.

  2. 2

    Internal inspection

    Open the scanner unit and check if the print carriage can move freely from left to right.

  3. 3

    Clean rollers

    Use a damp cloth to wipe the rubber rollers to restore proper traction.

Frequently asked questions

The E-01 error indicates a paper jam or that the paper sensor detects an obstruction along the feed path.

After removing the paper, power off the printer for 60 seconds. This allows the internal sensors to recalibrate.

Always use genuine Epson 664 series ink. Alternative inks can clog the MicroPiezo print heads.

Never overload the tray and ensure the paper guides are snug against the paper edges.