e-006fi-7300NX

Fujitsu fi-7300NX Error E-006: Troubleshooting Guide

The Fujitsu fi-7300NX error E-006 is an input sensor fault that occurs when the scanner's document feeder mechanism encounters a blockage or dirty rollers. This alert stops the feeding process to prevent document damage. Users can typically clear this error by cleaning the paper path and verifying the roller condition.

1 views

Common causes

  • 1Sensor blockage due to paper dust.
  • 2Natural wear on intake rollers.
  • 3Foreign objects trapped in the feeding path.
  • 4Misalignment of the ADF feeder.

Solutions

Diagnóstico rápido

If the error E-006 appears consistently, check for small paper fragments. Paper dust accumulation on the optical sensor is the most frequent cause.

Solución paso a paso

  1. Power Off: Disconnect the power cord.
  2. Clear Path: Remove all documents from the input tray.
  3. Manual Clean: Clean the intake rollers using manufacturer-approved cleaner.
  4. Reset: Reconnect power and test with a single page.

Prevención y mantenimiento

Regular cleaning of the paper path prevents document jams. Ensure that all staples and clips are removed prior to feeding.

Cuándo llamar a un técnico

If the error persists despite thorough cleaning, the feed sensor may require a professional diagnostic test.

Ficha técnica del equipo

  • Technology: High-speed duplex scanner.
  • Speed: 60 ppm / 120 ipm.
  • Consumable: Roller Kit PA03670-0002.
  • Connectivity: Wi-Fi, Ethernet, USB 3.1.
  • Firmware: Manufacturer support

Steps to follow

  1. 1

    Open Scanner

    Raise the top cover to access the feeding path.

  2. 2

    Clear Obstructions

    Remove any paper scraps blocking the roller sensors.

  3. 3

    Clean Rollers

    Wipe the rubber rollers using F1 cleaning fluid and a clean cloth.

Frequently asked questions

This code indicates the input sensor cannot detect the paper, usually due to debris or dirt on the rollers.

Most of the time, it is caused by dust and can be fixed with regular cleaning.

Always use the original PA03670-0002 roller kit for this model.

We recommend a monthly cleaning schedule to maintain performance.