e-005imageFORMULA DR-M160

Canon imageFORMULA DR-M160 Error E-005: Fixing Guide

The Canon imageFORMULA DR-M160 error E-005 is a common notification that the device's CIS (Contact Image Sensor) lamp has failed its calibration routine. This prevents the scanner from correctly reading the documents. A thorough cleaning of the glass surface is the first recommended step to resolve this issue.

1 views

Common causes

  • 1Excessive dust or stains on the exposure glass.
  • 2Defective or reached-life-end LED CIS lamp.
  • 3Mechanical blockage of the scan head carriage.
  • 4Faulty internal calibration circuitry.

Solutions

Diagnóstico rápido

The error E-005 is triggered if the internal lighting fails to detect the white reference level during power-on initialization. Why does my Canon scanner show error E-005? Often, dust on the glass or an aged LED lamp is the primary cause.

Solución paso a paso

  1. Power off: Completely disconnect the scanner from the electrical source for at least 60 seconds.
  2. Clean glass: Open the top cover and gently clean the internal scanning glass with a dry, lint-free cloth.
  3. Restart: Plug the device back in and allow it to initialize with the paper feed tray empty.

Prevención y mantenimiento

Maintain the scanner by cleaning the roller assembly and exposure glass periodically. Avoid chemical sprays; if a cleaner is required, use a specialized electronic cleaning fluid approved by the manufacturer.

Cuándo llamar a un técnico

If cleaning the optical path does not clear the E-005 status code, the CIS lamp unit or the scanner's main board may be damaged and requires professional repair.

Ficha técnica del equipo

  • Technology: High-speed document scanner (CIS).
  • Speed: Up to 60 ppm / 120 ipm.
  • Connectivity: USB 2.0.
  • Capacity: 60-sheet ADF.
  • Consumibles: Exchange roller kit.
  • Application: Commercial and office document processing.
  • Official drivers / firmware

Steps to follow

  1. 1

    Power off

    Unplug the unit from the wall.

  2. 2

    Clean glass

    Wipe the exposure glass with a lint-free cloth.

  3. 3

    Restart

    Power on after waiting one minute.

Frequently asked questions

The lamp module is failing to calibrate, usually due to dust or internal lamp failure.

Cleaning the glass is often sufficient to resolve minor sensor calibration errors.

Exchange roller kits are available for this specific document scanner model.

Perform monthly roller and glass cleaning to maintain high image quality.