e-003FTP-401MCL

Fujitsu FTP-401MCL Error E-003 Fix

The Fujitsu FTP-401MCL error E-003 indicates that the paper cutter motor has encountered an obstruction or has failed to complete the cutting cycle. This is usually caused by paper scraps jamming the blades.

1 views

Common causes

  • 1Cutter jam.
  • 2Mechanical wear.
  • 3Motor fault.
  • 4Sensor blockage.

Solutions

Diagnóstico rápido

If the cutter stalls, a paper jam at the exit is almost certainly the cause.

Solución paso a paso

  1. Turn off power.
  2. Access the cutter cover.
  3. Remove stuck paper.
  4. Reset machine.

Prevención y mantenimiento

Avoid pulling paper during operation.

Cuándo llamar a un técnico

If the motor clicks or fails to move after clearing, it's dead.

Ficha técnica del equipo

Frequently asked questions

The cutter motor or blade mechanism has failed to complete its cycle.

Look for jammed paper in the cutter slot.

It is a mechanical stall requiring manual intervention.

Do not pull the paper while cutting.

Fujitsu FTP-401MCL Error E-003 Fix | Vimazdev