e-002MC160n

OKI MC160n error E-002: Paper Jam Solution

The OKI MC160n error E-002 refers to a paper feed failure triggered by internal sensors. This error usually appears when paper fails to reach the registration roller or stops prematurely during input. Resolving the OKI MC160n error E-002 is straightforward, generally requiring the removal of paper scraps and a quick check of the tray guides.

1 views

Common causes

  • 1Poorly loaded or crumpled paper sheets.
  • 2Dust buildup on the paper path sensors.
  • 3Natural wear of the feed rollers.
  • 4Obstruction by tiny paper scraps in the print path.

Solutions

Quick Diagnosis

If E-002 appears without visible paper jams, check for misaligned paper stacks or worn feed rollers that may be failing to 'grab' the sheet properly.

Step-by-Step Solution

  1. Tray Removal: Pull out the main paper tray and look for torn debris.
  2. Path Inspection: Open the rear access door to inspect the paper path.
  3. Cleaning: Gently wipe the rubber feed rollers with a clean, dry cloth.
  4. Reset: Reload the paper, ensuring it sits correctly between the guides, and reboot the machine.

Prevention and Maintenance

Avoid using damp, wrinkled, or heavy cardstock paper that isn't compatible. Regularly clean the feed rollers to maintain traction.

When to Call a Technician

If the error persists after clearing the path and cleaning the rollers, an internal sensor might be faulty, requiring professional repair.

Ficha técnica del equipo

  • Technology: Multifunction LED.
  • Speed/Performance: 20 ppm.
  • Connectivity: USB, Ethernet.
  • Feeding Capacity: 250-sheet primary tray.
  • Compatible Consumables: OKI MC160 series toner.
  • Recommended Use: Home office.
  • Official Drivers / firmware

Steps to follow

  1. 1

    Access trays

    Remove the paper tray and check the main feed entrance area.

  2. 2

    Safe extraction

    Gently pull out any stuck paper, ensuring no fragments remain.

  3. 3

    Roller cleaning

    Wipe the feed rollers using a cloth slightly dampened with distilled water.

  4. 4

    Restart

    Close the tray and power cycle the printer to clear the internal sensor.

Frequently asked questions

The E-002 code indicates a paper feed error detected by the internal sensors, usually caused by a physical jam.

It stops all printing tasks, but it is a simple fix that doesn't usually require complex hardware service.

It utilizes the OKI C160 series of individual black and color toner cartridges.

Cleaning the rollers every six months is recommended to ensure smooth paper handling.

OKI MC160n error E-002: Paper Jam Solution | Vimazdev