e-001fi-7161C

Fujitsu fi-7161C error E-001: Paper Jam Solution

The Fujitsu fi-7161C error E-001 is a direct alert for a paper jam in the Automatic Document Feeder (ADF). The scanner detects that the document is not feeding correctly, which triggers an immediate motor shutdown to prevent sheet tearing or roller damage. This error is recurrent if feed rollers are dirty or worn.

1 views

Common causes

  • 1Dirty feed rollers with paper dust residue.
  • 2Documents with basis weight outside of specifications.
  • 3Obstruction by undetected staples or clips in the tray.
  • 4Natural wear of the roller kit life.

Solutions

Diagnóstico rápido

The E-001 appears on the scanner display or in the PaperStream software. If the scanner tries to pick up paper but stops after a second, it's a clear symptom of dirty friction rollers or a foreign object blocking the entry sensor.

Solución paso a paso

  1. Lift the ADF release lever and open the scanner cover fully.
  2. Gently remove any document causing the obstruction.
  3. Visually inspect the sensor area for any leftover staples or adhesive labels.
  4. Clean the feed rollers with a cloth lightly moistened with the official F1 Cleaner.
  5. Close the cover, ensure the sensor registers the closure, and test again with a clean document.

Prevención y mantenimiento

Roller cleaning should be done weekly or after 5,000 pages processed. Use an original maintenance kit to avoid degrading the roller rubber. Avoid scanning documents with clips or staples.

Cuándo llamar a un técnico

If the E-001 error persists after cleaning rollers and checking the paper path, the paper sensor may be defective or misaligned.

Ficha técnica del equipo

  • Technology: Fast Duplex ADF
  • Speed: 60 ppm / 120 ipm
  • Connectivity: USB 3.0
  • Capacity: 80 sheets
  • Compatible consumable: FI-7161 roller kit (PA03670-0002)
  • Recommended use: Corporate document digitization
  • Official drivers / firmware

Steps to follow

  1. 1

    Open scanner

    Use the release lever to open the ADF.

  2. 2

    Remove paper

    Gently extract any jammed documents.

  3. 3

    Cleaning

    Clean the rollers with a cloth moistened with official cleaner.

Frequently asked questions

This error occurs when a document blocks the ADF feed path.

Yes, the scanner stops immediately to prevent damage to documents.

Feed rollers and pads require replacement every 200,000 scans.

Align sheets correctly and do not exceed tray capacity.

Fujitsu fi-7161C error E-001: Paper Jam Solution | Vimazdev