e-0009fi-6800

Fujitsu fi-6800 Error E-0009: Motor Failure

The Fujitsu fi-6800 error E-0009 reports an overload or response failure in the document feed motor. This occurs when the mechanism faces mechanical resistance, often caused by sticky rollers or jammed paper residue.

1 views

Common causes

  • 1Mechanical obstruction.
  • 2Crystallized rubber rollers.
  • 3Motor overload.
  • 4Sensor failure.

Solutions

Quick Diagnosis

If you ask why does my Fujitsu fi-6800 show error E-0009?, the motor is unable to rotate at the programmed speed. The system blocks the motor for protection.

Step-by-Step Solution

  1. Inspect: Check for any debris in the path.
  2. Manual Check: Rotate rollers by hand to ensure they spin.
  3. Clean: Clean rollers to restore grip.
  4. Reset: Power cycle the scanner.

Maintenance and Prevention

Replace rollers according to the maintenance schedule.

When to Call a Technician

If the motor does not turn after clearing jams, the motor is likely faulty.

Technical Data

Steps to follow

  1. 1

    Check

    Look for jams.

  2. 2

    Test

    Rotate rollers.

  3. 3

    Power

    Restart scanner.

Frequently asked questions

Motor is blocked or faulty.

Yes, if it's just a simple jam.

Use FI-680BRK kit.

If motor doesn't rotate.

Fujitsu fi-6800 Error E-0009: Motor Failure | Vimazdev