e-0006SureColor S60600L

Error E-0006 Epson SureColor S60600L: Position sensor

Epson SureColor S60600L error E-0006 is a sign that the control system has lost the position reference of the print carriage. This error frequently arises due to contaminant build-up on the encoder strip or an obstruction on the sliding rail. It is a technical fault that requires precision and care when cleaning optical components.

1 views

Common causes

  • 1Encoder strip (transparent) with stains or dust.
  • 2Physical obstruction in the carriage path.
  • 3Wear of the position reading optical sensor.
  • 4Lack of lubrication on the carriage transport rail.

Solutions

Quick Diagnosis

Error E-0006 halts the equipment at startup or during printing, indicating that the optical sensor cannot read the reference marks on the encoder. Observe for ink stains or material scraps on the transparent plastic strip running along the chassis.

Step-by-step Solution

  1. Access the carriage: Move the print carriage manually towards the center (without powering on).
  2. Strip inspection: Look for stains on the transparent encoder strip.
  3. Delicate cleaning: Dampen a microfiber cloth slightly with head cleaning liquid (or distilled water) and wipe the strip gently.
  4. Rail verification: Ensure the sliding rail is clean and well-lubricated according to specifications.
  5. Reset: Power on the equipment so it can recalibrate its initial position.

Prevention and Maintenance

Perform monthly cleaning of the rails and encoder strip. Prevent ink overspray from accumulating inside the chassis using proper ventilation and clean filters. Do not force the carriage manually in a rough manner.

When to call a technician

If after cleaning the encoder strip the error E-0006 continues to appear, the optical sensor may have misaligned, or the carriage motor is worn out, requiring technical intervention with measurement tools.

Technical Specifications

  • Technology: PrecisionCore Piezoelectric
  • Encoder: High-resolution positioning strip
  • Speed: High-speed industrial
  • Connectivity: Gigabit Ethernet
  • Maintenance: Periodic rail lubrication
  • Recommended Use: High-impact signage
  • Official drivers / firmware

Steps to follow

  1. 1

    Strip inspection

    Check the encoder strip (transparent strip) for ink stains or dust.

  2. 2

    Gentle cleaning

    Clean the encoder strip with a lint-free cloth and a mild cleaning solution recommended by Epson.

  3. 3

    Manual movement

    Move the carriage manually side to side to check for mechanical resistance.

  4. 4

    Reset

    Turn on the printer and let it perform the initialization cycle.

Frequently asked questions

This error indicates that the encoder sensor cannot read the carriage position correctly, usually because the strip is dirty or damaged.

You must be extremely careful; if the strip is scratched or bent, you will need to replace it, which requires professional calibration.

Keeping the carriage area clean and avoiding ink spills near optical sensors will drastically reduce this issue.

Yes, if the encoder is clean but the error persists, it could indicate that the carriage motor is losing torque or failing.