e-0005SureColor S60600L

Error E-0005 Epson SureColor S60600L: Ink sensor

Epson SureColor S60600L error E-0005 is a notification indicating that the system fails to read the ink bag chip. This issue occurs when the supply sensor detects a disconnection or illegible data on the consumable. It is a common fault resolved primarily through cleaning contacts or proper placement of the bag.

0 views

Common causes

  • 1Dirt or grease on the consumable chip.
  • 2Chip misaligned with the compartment sensor.
  • 3Slight corrosion of ink reader pins due to humidity.
  • 4Use of defective compatible chips.

Solutions

Quick Diagnosis

If you receive the E-0005 alert, the printer panel should specify which ink color has the error. If the problem is persistent, check if the chip has ink residue or fingerprints, which block the internal reader signal.

Step-by-step Solution

  1. Identify the channel: Check the control panel to see which bag is flagging the error.
  2. Safe removal: Extract the ink bag carefully.
  3. Chip maintenance: Use a soft, dry cloth to clean the gold terminals of the chip.
  4. Firm reinsertion: Insert the bag until the end to ensure the reader pins make full contact.
  5. Verification: If the ink control system requests confirmation, accept the replacement if necessary.

Prevention and Maintenance

Always handle ink bags by the edges to avoid touching the chip with your skin. Clean the ink compartment monthly to avoid vapor build-up that corrodes the electrical reader contacts.

When to call a technician

If after testing with a new bag the error still flags in the same slot, the ink channel chip reader might have bent pins or a defective module.

Technical Specifications

  • Technology: Eco-solvent printing
  • Consumables: Epson UltraChrome GS3 (1.5L series)
  • Sensors: Integrated chip reader per color channel
  • Speed: High production large format
  • Connectivity: USB/Ethernet
  • Recommended Use: Professional signage
  • Official drivers / firmware

Steps to follow

  1. 1

    Check ink bags

    Remove the ink bags that show an error and ensure the chip is clean.

  2. 2

    Clean chip contacts

    Wipe the metal contacts of the bag chip with a dry cloth to ensure proper communication.

  3. 3

    Reinstallation

    Insert the ink bag back into its slot until the machine detects it correctly.

  4. 4

    Verify level

    Check on the control panel if the ink level updates correctly.

Frequently asked questions

This error means the ink bag sensor cannot read the info chip correctly, either due to dirt or improper installation.

Before discarding it, try cleaning the contacts; often the problem is just a poor physical connection.

Yes, using non-original or poorly cloned chips is the number one cause of E-0005 errors in SureColor units.

It shouldn't be frequent. If it always happens with the same slot, the chip reader of that slot might be damaged.