e-0004FS-1041

Kyocera FS-1041 error E-0004: USB Connection Fault

The Kyocera FS-1041 error E-0004 is a warning indicating an interruption in the USB communication signal. When my Kyocera FS-1041 shows error E-0004, it means the unit cannot complete the handshake with the system driver. This is usually resolved by replacing the cable.

1 views

Common causes

  • 1Low-quality USB cable.
  • 2Electromagnetic interference.
  • 3Insufficient port voltage.
  • 4Driver conflict in the OS.

Solutions

Quick Diagnosis

If the error only happens with large files, your cable likely lacks shielding.

Step-by-step Solution

  1. Disconnect the USB cable.
  2. Switch ports on your computer.
  3. Replace the cable with a standard 1.8m version.
  4. Restart your printer service.

Prevention and Maintenance

Use certified 2.0 cables with ferrite cores to prevent signal drops.

When to call a technician

If the printer is not recognized on multiple computers, the main board may be at fault.

Device technical specs

Steps to follow

  1. 1

    Replace cable

    Try a high-quality USB cable.

  2. 2

    Change port

    Connect to a rear port on your PC.

  3. 3

    Reinstall driver

    Update or reinstall the official driver.

Frequently asked questions

The printer is unable to maintain a stable USB connection.

Most of the time it is the cable or USB port.

Genuine TK-1115 toner.

Only after verifying the cable connection.