Drum ErrorRicoh SP 230DNw

Fixing Drum Error on Ricoh SP 230DNw: Maintenance Guide

The 'Drum Error' on the Ricoh SP 230DNw suggests the image drum unit is not recognized or has reached its functional limit. This component is essential for toner transfer. Addressing this promptly ensures print quality and prevents mechanical stress.

1 views

Common causes

  • 1Toner dust buildup on connectors.
  • 2Improper drum installation after maintenance.
  • 3Drum unit reaching end-of-life.

Solutions

Cleaning contacts

  1. Power off and unplug the printer.
  2. Open the front cover and remove the drum/toner assembly.
  3. Clean the golden electrical contacts with a dry, lint-free cloth.

Reinstallation

  1. Reinsert the assembly until it clicks into place.
  2. Close the cover firmly.
  3. Power on the device.

Steps to follow

  1. 1

    Power cycle

    Turn off the printer and disconnect it from the power source for safety.

  2. 2

    Remove drum

    Open the front lid and carefully pull out the drum unit assembly.

  3. 3

    Check and clean

    Use compressed air or a soft cloth to clean the area before sliding it back in.

Frequently asked questions

Often, cleaning the contacts resolves the issue. Only replace it if the error persists or if print quality is severely degraded.

Do not touch the green or blue drum surface, as skin oils can damage the photosensitive layer.

A drum typically lasts around 12,000 pages, though environmental factors may affect this count.