drum-errorMFC-9130CW

Brother MFC-9130CW error drum-error: Reset Guide

The Brother MFC-9130CW error drum-error indicates that the internal counter for the drum unit has reached its limit. This is a standard warning meant to protect image quality.

1 views

Common causes

  • 1Counter limit reached
  • 2Dirt on corona wire
  • 3Worn cylinder
  • 4Defective sensor

Solutions

Diagnóstico rápido

If print quality is still good, it's just a cycle reset needed. If lines appear, the drum is worn out.

Solución paso a paso

  1. Leave printer on, open the front door.
  2. Press 'Clear' on the touchscreen.
  3. Choose the color drum to reset.
  4. Confirm 'Yes' and close the door.

Prevención y mantenimiento

Use the green sliding tab to clean the corona wire during toner swaps.

Cuándo llamar a un técnico

If streaks persist after cleaning and resetting, the physical unit needs replacement.

Ficha técnica del equipo

  • Technology: LED
  • Speed: 23 ppm
  • Connectivity: Wi-Fi, Ethernet, USB
  • Consumable: DR-221CL Drum Unit
  • Usage: Small Office
  • Official Drivers/Firmware

Frequently asked questions

Use the 'Clear' button menu with the front cover open.

Yes, but ensure the drum is actually in good condition to avoid poor print quality.

The DR-221CL set is the standard replacement.

Clean the corona wire every time you install a new toner cartridge.