drum-errorHL-2130

Brother HL-2130 drum error: How to fix it quickly

The Brother HL-2130 drum error occurs when the printer's internal firmware determines that the imaging drum has reached its end of life. This guide addresses why is my Brother HL-2130 drum error occurring and provides the steps to bypass it. Usually, this is a simple counter issue that does not require hardware replacement immediately.

1 views

Common causes

  • 1Firmware counter limit reached
  • 2Accumulated toner dust
  • 3Drum surface scratches
  • 4Dirty contact sensors

Solutions

Diagnóstico rápido

The error light sequence on the control panel signals a drum issue. Confirm there are no physical jams obstructing the roller.

Solución paso a paso

  1. Power on the printer and open the front door.
  2. Press and hold the Go button for 4 seconds until lights turn on.
  3. Release the button and close the front cover.

Prevención y mantenimiento

Regularly clean the internal rollers with a dry cloth and avoid touching the drum surface with bare hands.

Cuándo llamar a un técnico

If streaks appear on the page after resetting, the drum is physically damaged.

Ficha técnica del equipo

  • Technology: Monochrome Laser
  • Speed: 20 ppm
  • Connectivity: USB 2.0
  • Consumables: DR-2200 Drum, TN-2010 Toner
  • Usage: Home/Office
  • Official Drivers

Steps to follow

  1. 1

    Access Drum

    Open the front cover.

  2. 2

    Reset

    Hold Go for 4 seconds.

  3. 3

    Finalize

    Close the cover.

Frequently asked questions

The drum counter limit has been reached in the firmware.

Yes, unless print quality is poor.

Uses DR-2200 drum series.

Frequent cleaning prevents sensor triggers.