drum-end-soonMFC-L6800DW

Brother MFC-L6800DW Drum End Soon Error: Fix Guide

The Brother MFC-L6800DW Drum End Soon error indicates that the drum unit is nearing its estimated operational limit. While the message is triggered based on usage cycles, you can often continue printing if the quality remains acceptable. This guide helps you identify if a reset is sufficient or if a replacement is necessary.

1 views

Common causes

  • 1Reached cycle count: Software limit reached.
  • 2Corona wire dirt: Dust or toner buildup.
  • 3Surface wear: Physical degradation of the drum coating.
  • 4Improper seating: Drum not aligned correctly.

Solutions

Quick Diagnosis

Look for the error message on the control panel. If your prints show faint vertical lines or repeating spots, the hardware is physically worn regardless of the counter.

Step-by-Step Solution

  1. With the power on, open the front cover.
  2. Locate the drum replacement menu on the touchscreen.
  3. Press the 'Clear' or 'X' button for 5 seconds.
  4. Confirm your selection by choosing 'Yes'.
  5. Close the cover and check if the printer is ready.

Prevention and Maintenance

Clean the internal corona wire periodically. Using genuine supplies prevents premature residue buildup on the drum surface.

When to Call a Technician

If internal grinding noises occur or print quality remains poor after cleaning, hardware failure is likely.

Equipment Data

  • Technology: Monochrome Laser
  • Speed: Up to 52 ppm
  • Connectivity: USB, Ethernet, Wi-Fi
  • Compatible Consumable: DR-820 / DR-890 Drum Unit
  • Recommended Use: High-volume business
  • Official Drivers/Firmware

Steps to follow

  1. 1

    Open front cover

    Open the front cover of the printer while the unit is on.

  2. 2

    Access replacement menu

    Press and hold the Clear button or the X icon for 5 seconds.

  3. 3

    Confirm reset

    Select Drum on the menu and confirm with Yes.

Frequently asked questions

You can reset it using the printer maintenance menu as described in this guide if the drum is still performing well.

It is safe, but print quality may degrade. This is a preventative message to notify you of the nearing end of life.

This error refers to the Drum Unit (DR-820 or DR-890). Do not confuse it with the toner cartridge.

Clean the corona wire regularly with the green tab and keep the printer in a clean environment.

Brother MFC-L6800DW Drum End Soon Error: Fix Guide | Vimazdev