Configuration Settings ErrorZD220T / ZD220D

Troubleshooting Configuration Settings Error Zebra ZD220

The configuration settings error on the Zebra ZD220 occurs when internal memory parameters mismatch with driver commands. This issue prevents the printer from processing labels and often requires a hardware reset. Maintaining accurate settings is key to reliable performance.

1 views

Common causes

  • 1Memory file corruption following sudden power loss.
  • 2Conflict between Windows driver and active ZPL settings.
  • 3Sending incompatible ZPL scripts to the ZD220.

Solutions

Factory Reset

  1. Power off the printer.
  2. Hold down the Feed button while turning the device back on.
  3. Release when the light flashes.
  4. Confirm the configuration page prints.

Driver Update

  1. Uninstall the current Zebra ZD220 driver.
  2. Download the latest version from the official support site.
  3. Perform a clean installation selecting the correct communication port.

Steps to follow

  1. 1

    Check USB Connection

    Unplug the USB cable and reconnect it to a different high-speed port on your computer.

  2. 2

    Open Zebra Setup Utilities

    Launch the software on your PC and ensure the printer is detected correctly.

  3. 3

    Send Reset Command

    Use the 'Reset Printer to Factory Defaults' option in the configuration tools menu.

Frequently asked questions

It usually happens due to sudden driver setting changes or sending label formats incompatible with the ZD220's native language.

A factory reset affects device settings like network or label size, but does not delete your design files stored in your labeling software.

Only if the error persists after resetting factory defaults, a firmware update may improve system compatibility.