comm-timeout-09RP4T II Mobile

Honeywell RP4T II Mobile error COMM-TIMEOUT-09: Solution

The Honeywell RP4T II Mobile error COMM-TIMEOUT-09 arises when the printer loses communication with the host. This error is common in logistics environments where Wi-Fi coverage fluctuates. Managing your connection properly ensures productivity in warehouses.

1 views

Common causes

  • 1Loss of wireless signal.
  • 2Local IP conflicts.
  • 3External electromagnetic interference.
  • 4Communication buffer saturated by data.

Solutions

Quick Diagnostics

The COMM-TIMEOUT-09 error is identified when the printer panel stops responding to wireless print jobs.

Step-by-Step Solution

  1. Restart Bluetooth or Wi-Fi on your host device.
  2. Power off the printer and turn it on after 10 seconds.
  3. Verify that the signal is within the coverage range.
  4. Forget and re-pair the device in the network settings.

Prevention and Maintenance

Update firmware if you experience recurring disconnections. Ensure a network with low traffic in critical areas.

When to Call a Technician

If the printer's internal antenna fails to detect any network after multiple attempts, it may be a hardware failure in the comms board.

Equipment Technical Data

  • Technology: Mobile Thermal
  • Ruggedness: IP54
  • Connectivity: Bluetooth, Wi-Fi 802.11
  • Compatible Consumable: RP4T series labels
  • Recommended Use: Mobile inventory
  • Official drivers / firmware

Frequently asked questions

Wireless connectivity was lost or there is too much network traffic.

Restart the device and the printing source (tablet/PC).

RP4T series thermal labels.

It occurs in areas with high electromagnetic interference.