c4700TASKalfa 2552ci

Kyocera TASKalfa 2552ci Error C4700: Fuser Fault

The Kyocera TASKalfa 2552ci error C4700 points to a thermal issue within the fuser assembly. When users ask how to fix C4700 error on Kyocera TASKalfa 2552ci, checking for jammed paper or fuser surface damage is the primary course of action. Constant heavy usage without service can lead to this failure.

1 views

Common causes

  • 1Thermistors failing to read the correct temperature.
  • 2Physical blockage in the fuser exit path.
  • 3Degraded heating element.
  • 4Worn-out pressure roller surfaces.

Solutions

Quick Diagnosis

If the machine displays C4700, observe if the paper exits with wrinkles or burn marks. These signs indicate that the heat in the fuser is incorrectly regulated.

Step-by-Step Solution

  1. Switch off the printer and let it rest for 20 minutes.
  2. Locate the fuser unit access door on the back.
  3. Gently remove any obstructions or labels stuck on the rollers.
  4. Close the unit completely and restart the system.

Prevention and Maintenance

Use only standard weight paper and avoid recycling damaged pages. Schedule professional maintenance to clean the fuser components.

When to Call a Technician

If restarting does not clear the error, the fuser assembly may have suffered permanent wear and requires professional replacement.

Technical Data Sheet

  • Technology: Color Laser MFP
  • Output Speed: 25 ppm
  • Connectivity: LAN, USB
  • Paper Capacity: 1,150 sheets
  • Compatible Consumables: TK-8345
  • Recommended Use: Enterprise office
  • Official Drivers / Firmware

Frequently asked questions

Power down, clear any paper jams, and allow the unit to cool before restarting.

It can indicate overheating, so treat it with caution.

Using quality TK-8345 toner reduces debris that damages the fuser.

Technical inspection is suggested every 100,000 prints.

Kyocera TASKalfa 2552ci Error C4700: Fuser Fault | Vimazdev