c4210ECOSYS P3260dn

Kyocera ECOSYS P3260dn Error C4210 Fix

The Kyocera ECOSYS P3260dn error C4210 occurs when the paper feed sensor detects an inconsistency in the sheet transport. If you wonder how to fix C4210 error on Kyocera ECOSYS P3260dn, the solution usually lies in a thorough cleaning of the paper path. This model is a high-performance printer optimized for continuous productivity.

1 views

Common causes

  • 1Surface wear on the rubber feed rollers.
  • 2Use of paper outside specifications (too heavy/textured).
  • 3Obstruction by paper fragments in the registration sensor area.
  • 4Faulty solenoid triggering the feed mechanism.

Solutions

Quick diagnosis

The C4210 error is signaled by a sudden halt in printing. Check if paper has shifted sideways or if labels are stuck to the feed rollers.

Step-by-step resolution

  1. Remove the paper tray to access the pickup roller.
  2. Use a damp cloth with distilled water to clean the rubber feed rollers.
  3. Inspect the exit path for torn paper stuck near the fuser area.
  4. Reinstall the tray and verify that side guides are snug against the paper stack.

Prevention and maintenance

Avoid using damp or low-quality paper, as paper dust degrades roller grip. Perform preventative cleaning every six months.

When to call a technician

If rollers appear visibly worn (smooth/shiny surface) or the feed motor makes grinding noises, contact service support.

Technical specifications

  • Technology: Laser
  • Feeding capacity: 600 sheets expandable
  • Speed: High productivity
  • Compatible consumable: TK-3160 / TK-3170
  • Official drivers / firmware

Steps to follow

  1. 1

    Remove tray

    Completely remove the lower paper tray.

  2. 2

    Clean rollers

    Clean the feed rollers using a damp cloth with distilled water.

  3. 3

    Check sensors

    Ensure no paper scraps are blocking the paper path sensors.

Frequently asked questions

This code indicates an issue within the paper feed mechanism, typically due to dirty rollers or misaligned paper.

No, the printer locks up for safety until the obstruction in the paper path is cleared.

Standard 60-120g/m2 bond paper is recommended to prevent feed failures and jams.

Cleaning every 50,000 pages or whenever feed performance drops is highly recommended.

Kyocera ECOSYS P3260dn Error C4210 Fix | Vimazdev