c4200TASKalfa 6002i

Kyocera TASKalfa 6002i error C4200: Lamp Failure

The Kyocera TASKalfa 6002i error C4200 indicates a failure within the exposure lamp or associated light sensor. This prevents the scanner from calibrating properly, rendering scanning functions unusable.

1 views

Common causes

  • 1End-of-life exposure lamp.
  • 2Cable disconnection.
  • 3Heavy debris on scan path.
  • 4CCD sensor failure.

Solutions

Diagnóstico rápido

If the system attempts to calibrate the lamp but fails repeatedly, it throws the C4200 code. This is usually hardware-related.

Solución paso a paso

  1. Shutdown: Power off the device.
  2. External Clean: Clean the platen glass.
  3. Test: Power up again.
  4. Service: If error persists, lamp replacement is necessary.

Prevención y mantenimiento

Daily cleaning of the platen glass prevents sensor errors. Avoid direct bright light sources near the printer.

Cuándo llamar a un técnico

Scanner assembly repairs require trained technicians to ensure perfect lighting calibration.

Ficha técnica del equipo

  • Technology: Laser Multifunction
  • Speed: 60 ppm
  • Connectivity: Gigabit LAN
  • Compatible Consumables: TK-6325 Toner
  • Use case: Heavy-duty corporate
  • Official Drivers / Firmware

Frequently asked questions

It is a scanner exposure lamp failure where the light intensity is below the required levels.

Yes, for safety, power down immediately.

TK-6325 toner is required for contrast standards.

Keep the scanner glass clean to avoid sensor misreadings.