c4000ECOSYS P6130cdn

Error C4000 Kyocera ECOSYS P6130cdn: Fuser Failure

The Kyocera ECOSYS P6130cdn error C4000 indicates the fuser is failing to reach operating temperature. This is a critical lockout.

1 views

Common causes

  • 1Fuser heating lamp failure.
  • 2Thermistor degradation.
  • 3Voltage instability.
  • 4Dirty thermal sensors.

Solutions

Quick Diagnosis

If persistent, check for hardware thermal failure within the fuser unit.

Step-by-Step Solution

  1. Unplug for 15-20 minutes.
  2. Connect to a direct wall outlet.
  3. Check for rear paper jams.
  4. If error recurs, replace fuser.

Maintenance

Ensure proper ventilation to prevent thermal sensor errors.

When to call a technician

Fuser replacement requires professional calibration.

Technical Specifications

  • Tech: Laser Color
  • Speed: 30 ppm
  • Connectivity: USB/Ethernet
  • Capacity: 600 sheets
  • Consumable: FK-5140 Fuser
  • Usage: Office
  • Drivers

Frequently asked questions

Fuser unit fault, showing the temperature hasn't reached target operating levels.

Yes, wait 15 minutes to allow sensor reset.

FK-5140 Fuser unit.

Clean rear area and check for ventilation blockage.