c3300FS-1036MFP

Kyocera FS-1036MFP Error C3300: Laser Motor Fail

The Kyocera FS-1036MFP error C3300 is a critical hardware alert indicating a failure of the laser scanner's polygon motor. Users searching why does Kyocera show error C3300 often find this issue is a permanent mechanical failure. This article helps identify the cause and outlines the standard professional repair path.

1 views

Common causes

  • 1Seized polygonal mirror motor.
  • 2Failed scanner motor sensor.
  • 3Contamination within the laser optic chamber.
  • 4Logic board communication error with the laser.

Solutions

Quick Diagnosis

If the printer error C3300 appears during every startup, the laser scan motor has likely seized or failed internally.

Step-by-step Solution

  1. Shut down.
  2. Wait 20 minutes.
  3. Check for external obstructions.
  4. Restart machine.

Prevention and Maintenance

Keep the printer in a cool, dust-free environment. Do not use generic toners, as their dust output can contaminate sensitive laser optics.

When to Call a Professional

This error almost certainly requires replacing the laser scanner unit by a Kyocera-certified technician.

Equipment Specs

  • Technology: Laser.
  • Speed: 36 ppm.
  • Consumable: TK-1120.
  • Usage: Corporate.
  • Support

Steps to follow

  1. 1

    Reset Power

    Power down and disconnect for 20 minutes to discharge capacitors.

  2. 2

    Check Cable Connections

    Ensure data cables to the laser scanner are firmly seated.

  3. 3

    Air Cleaning

    Use compressed air to clean optical paths near the laser motor.

Frequently asked questions

The polygon mirror motor is unable to reach required operational speed.

Usually requires replacement of the entire laser scan unit.

TK-1120 cartridges ensure print quality won't overload the scanner environment.

Always perform a hard power reset first.