c3100TASKalfa 8002i

Kyocera TASKalfa 8002i error c3100: Fan motor fix

Kyocera TASKalfa 8002i error c3100 indicates a problem with the device's internal cooling fan. When the device sensors report that the fan is stalled or under-performing, it triggers this error to prevent circuit board thermal failure. Prompt cleaning often resolves the issue.

0 views

Common causes

  • 1Dust buildup: Prevents smooth fan rotation.
  • 2Motor Failure: Electrical end-of-life.
  • 3Foreign Objects: Debris caught in fan blades.
  • 4Sensor Error: RPM signal cable is damaged.

Solutions

Quick Diagnosis

If you see c3100, it means the cooling system isn't running as expected, which explains why does Kyocera TASKalfa 8002i show error c3100 when heating starts. Check for blockages in the ventilation path.

Step-by-Step Solution

  1. Power Off: Shut down the unit to avoid thermal risks.
  2. Clean Vents: Clear all dust from side intake grids using compressed air.
  3. Inspect: Ensure no debris is physically pinning the fan blades.
  4. Reset: Reboot the printer to re-test the fan status.

Preventive Maintenance

Dust the ventilation areas every three months. Ensure the printer has enough clearance from walls.

When to Call a Technician

If the fan remains motionless after cleaning, the motor assembly is faulty and needs replacement by a technician.

Device Specifications

  • Technology: Monochrome Laser
  • Speed: 80 ppm
  • Connectivity: Gigabyte LAN
  • Consumables: TK-6705 Series
  • Usage: Enterprise Print Operations
  • Official Drivers / Firmware

Steps to follow

  1. 1

    Shut Down

    Turn off power.

  2. 2

    Clean Vents

    Blow out dust from vents.

  3. 3

    Inspect Fan

    Clear any debris.

  4. 4

    Reboot

    Power on and test.

Frequently asked questions

The main controller detects that the cooling fan is not spinning at the correct speed or is locked entirely.

No, persistent usage without cooling can lead to expensive internal overheating damage.

No, this is a mechanical fan issue, though dust around the toner area may contribute to the buildup.

Ensure there is at least 20cm of space around the machine and keep the area free of dust.

Kyocera TASKalfa 8002i error c3100: Fan motor fix | Vimazdev