C260Toshiba e-STUDIO 5008LP

Fixing C260 Error on Toshiba e-STUDIO 5008LP: Fuser Issue

The C260 code is a critical safety indicator in the Toshiba e-STUDIO 5008LP signaling an issue with the fuser unit's temperature sensor (thermistor). This sensor monitors the fuser's heat levels to ensure proper toner fixation. If the temperature is abnormal, the machine locks to prevent overheating.

1 views

Common causes

  • 1Toner buildup covering the surface of the temperature sensor.
  • 2Physical wear of the thermistor due to high-temperature operation cycles.
  • 3Short circuit in the fuser unit's power harness.

Solutions

Thermistor Cleaning

  1. Power off the unit and allow the fuser to cool for at least 30 minutes.
  2. Safely remove the fuser unit as per the service manual.
  3. Gently clean the thermistor surface with a lint-free, dry cloth.

Connector Verification

  1. Inspect the fuser's wiring harness for damage or loose pins.
  2. Ensure all connection terminals are clean and free of toner residue.
  3. Reseat the unit carefully to ensure a solid electrical connection.

Steps to follow

  1. 1

    Cooling Down

    Wait for the fuser unit to reach ambient temperature.

  2. 2

    Removing Fuser Unit

    Slide out the fuser unit with caution.

  3. 3

    Sensor Check

    Inspect and clean the sensor or reseat connection cables.

Frequently asked questions

No, the error signals a thermal regulation failure. Do not attempt to bypass this as it poses a safety risk.

Only if you are comfortable with internal printer maintenance. If unsure, contact a certified technician.

Often, replacing just the thermistor suffices, but visible damage to the fuser rollers will require a full unit replacement.