c105ECOSYS PA2001

Kyocera ECOSYS PA2001 error C105: Troubleshooting Guide

The Kyocera ECOSYS PA2001 error C105 is a technical alert indicating that the printer's cooling fan system has malfunctioned. This error code usually appears when the control board fails to detect proper rotation speed from the internal fan, which may trigger a protective shutdown. By performing a quick power cycle and cleaning the intake vents, users can often resolve this issue without professional assistance.

0 views

Common causes

  • 1Internal fan obstructed by dust or foreign objects.
  • 2Fan motor bearing failure due to long-term wear.
  • 3Loose power connector cable on the main control board.
  • 4Overheating caused by poor environmental airflow.

Solutions

Diagnóstico rápido

The C105 error is confirmed if the printer stops during operation and the fan motor is silent. To determine why does my Kyocera ECOSYS PA2001 show error C105, check for visible dust or debris blocking the back vent area. If the fan sounds noisy or is completely stationary, the issue is likely physical obstruction.

Solución paso a paso

  1. Power cycle: Unplug the power cable from the wall for at least one minute.
  2. Clear ventilation: Use compressed air to clear any dust from the rear vent slots.
  3. Environmental check: Ensure the printer has at least 10cm of clearance from walls.
  4. Restart: Plug in the machine and turn it on to verify if the code clears.

Prevención y mantenimiento

Regularly dusting the machine's exterior keeps internal components cool. Maintain a clean printing environment and avoid placing the device on carpets to prevent lint ingestion. Original toner cartridges are recommended for optimal performance.

Cuándo llamar a un técnico

If the fan makes a grinding noise or the error returns immediately after restart, the cooling fan or the motherboard sensor may be failing, requiring professional repair.

Ficha técnica del equipo

  • Technology: Monochrome Laser
  • Performance: 20 ppm
  • Connectivity: USB 2.0
  • Tray capacity: 150 sheets
  • Compatible Consumables: TK-1240 series
  • Recommended Use: Home or small office
  • Official Drivers / Firmware

Steps to follow

  1. 1

    Power off

    Unplug the device for 60 seconds.

  2. 2

    Inspect vents

    Check for obstructions in the rear fan area.

  3. 3

    Power on

    Plug in and restart the printer.

Frequently asked questions

This code indicates an internal cooling fan speed or functionality fault.

Yes, cooling failures can lead to mainboard overheating.

It uses the TK-1240 series toner cartridges.

Every six months to prevent dust accumulation.

Kyocera ECOSYS PA2001 error C105: Troubleshooting Guide | Vimazdev