c0900bizhub C10

Konica Minolta bizhub C10 Error C0900: Tray Motor Issue

The Konica Minolta bizhub C10 error C0900 represents an issue with the tray lifter motor. When this error occurs, the printer cannot feed paper because the platform is not at the correct height. Troubleshooting typically involves clearing physical debris from the tray assembly.

0 views

Common causes

  • 1Overloaded paper tray.
  • 2Debris in lifting gears.
  • 3Faulty height sensor.
  • 4Electric failure in motor assembly.

Solutions

Diagnóstico rápido

The C0900 error identifies specific failure in the elevator motor for the paper tray.

Solución paso a paso

  1. Extract the main paper tray.
  2. Inspect the lifting mechanism for any obstructions.
  3. Ensure the paper tray sensor is clean.
  4. Reboot the system to attempt a new motor calibration.

Prevención y mantenimiento

Never fill paper past the maximum level indicator to avoid straining the lifting motor.

Cuándo llamar a un técnico

If the motor remains unresponsive after clearing debris, the controller or motor may be faulty.

Ficha técnica del equipo

Steps to follow

  1. 1

    Drawer

    Pull out the tray.

  2. 2

    Clean

    Remove paper bits.

  3. 3

    Check

    Verify elevator plate.

  4. 4

    Restart

    Reboot machine.

Frequently asked questions

This code indicates a failure in the paper tray lifting motor, preventing paper from reaching the feed position.

Yes, if it's a minor jam. Otherwise, the motor might need replacement.

It uses TN-115 toner kits.

It is infrequent and often related to improper paper loading.