c0600bizhub 350

Konica Minolta bizhub 350 error C0600: Scanner Failure

The Konica Minolta bizhub 350 error C0600 is a service warning related to the scanning system. This error signals that the optical capture carriage fails to reach its resting position or that the drive motor has encountered abnormal resistance. A simple visual inspection of the mechanism often rules out physical obstructions.

1 views

Common causes

  • 1Physically blocked scanner carriage.
  • 2Home position sensor failure.
  • 3Worn-out scanner drive belt.
  • 4Damaged or torque-less scanner motor.

Solutions

Quick Diagnostic

The C0600 error occurs if you hear grinding noises from the glass cover or if the scanner stutters before displaying the alert.

Step-by-Step Solution

  1. Turn off the bizhub 350 and unplug.
  2. Lift the scanner lid and check if the carriage glides smoothly.
  3. Ensure there are no foreign objects inside the scanner cavity.
  4. Power on to allow the motor to relocate the 'Home' position.

Prevention and Maintenance

Regularly wipe the carriage rails with a lint-free cloth and keep the printer in a stable environment without heavy vibrations.

When to Call a Technician

C0600 requires professional support if the drive belt is loose or if the motor has suffered internal failure.

Device Specs

  • Technology: Optical Scanning / Laser
  • Scan Speed: Up to 70 ipm
  • Connectivity: Ethernet / USB
  • Consumables: N/A (Optical maintenance)
  • Recommended Use: Corporate environments
  • Official Drivers / Firmware

Steps to follow

  1. 1

    Carriage inspection

    Make sure there are no paper scraps or dirt blocking the scanner's movement.

  2. 2

    Motor reset

    Power off and on; the system will attempt to recalibrate the initial home position.

  3. 3

    Cleaning

    Clean the scanner rails with a dry cloth to reduce friction.

Frequently asked questions

Mechanical scanner motor failure or failure to detect the home position.

No, a scanner lock disables copying and scanning functions.

Yes, dirt buildup on the rails increases friction and can cause motion errors.

If the error persists after cleaning and resetting, the motor or belt requires inspection.