c0600bizhub 195

Konica Minolta bizhub 195 error C0600: Fix

The Konica Minolta bizhub 195 error C0600 is a malfunction warning related to the scanner assembly. If you are wondering why my Konica Minolta bizhub 195 shows error C0600, it is almost certain that the scan motor fails to find its initial position after startup. Dirt accumulation on the rails is the primary cause of this mechanical lockout.

1 views

Common causes

  • 1Physical obstruction in the scanner movement rails.
  • 2Wear of the scanner motor drive belt.
  • 3Home position sensor failure due to dust buildup.

Solutions

Quick Diagnosis

The C0600 error occurs during the initialization phase. The scanner carriage attempts to move, fails to reach the end of its path, and the system stops the motor for safety.

Step-by-Step Solution

  1. Turn off the equipment and unplug.
  2. Lift the top cover and check if the scanner carriage moves freely by hand.
  3. Clean the rails where the scanner assembly slides carefully.
  4. Reconnect the equipment and turn it on; the motor will attempt to calibrate again.

Prevention and Maintenance

Avoid leaving heavy books on the glass. Keep the copier environment free of excessive dust to extend the life of the scanner sensors.

When to Call a Technician

If the error persists after cleaning, you may be facing an exposure lamp failure or a burnt motor optical sensor.

Device Technical Specs

  • Technology: Digital Monochrome Laser
  • Speed: 19 cpm
  • Connectivity: USB 2.0
  • Capacity: Standard 250-sheet tray
  • Compatible Consumable: TN-118
  • Recommended Use: Small volume corporate environments
  • Official drivers / firmware

Steps to follow

  1. 1

    Unlock

    Release the scanner carriage if blocked by debris.

  2. 2

    Clean rails

    Clean the movement rails with a dry cloth.

  3. 3

    Test

    Restart the machine to calibrate the motor position.

Frequently asked questions

The scanning motor fails to detect the 'home' position on startup.

Copies do not work, but printing from PC might still operate.

TN-118 toner.

Keep the scanner glass free of heavy objects.

Konica Minolta bizhub 195 error C0600: Fix | Vimazdev