C0200TASKalfa 9002i

Kyocera TASKalfa 9002i Error C0200: Troubleshooting Guide

The Kyocera TASKalfa 9002i error C0200 indicates that the document feeder has detected an obstruction or paper jam. This fault stops the scanning process, preventing the machine from processing document batches. Following these maintenance steps will help restore scanner functionality.

1 views

Common causes

  • 1Document jam within the ADF pathway.
  • 2Debris buildup on rubber feeding rollers.
  • 3Misaligned or faulty paper sensor.
  • 4Worn-out feed roller kits.

Solutions

Diagnóstico rápido

Error C0200 appears on the operator panel after attempting to initiate a scan job. If paper scraps are visible or the rollers feel tacky, the blockage is confirmed.

Solución paso a paso

  1. Power down the device and unplug it.
  2. Open the ADF top cover.
  3. Carefully extract any paper fragments or foreign objects.
  4. Clean the rollers and close the lid before restarting.

Prevención y mantenimiento

Perform roller cleaning every 10,000 scans. Always inspect originals for staples or tape. Using OEM Kyocera toner prevents excess dust buildup on optical sensors.

Cuándo llamar a un técnico

If the error persists after cleaning and rebooting, or if you hear grinding noises from the feeder, a sensor component may require professional replacement.

Ficha técnica del equipo

  • Technology: Monochrome Laser MFP
  • Speed: Up to 90 ppm
  • Connectivity: Gigabit Ethernet, USB 3.0
  • Paper Capacity: 7,650 sheets max
  • Consumables: TK-6325 Toner series
  • Use Case: Enterprise high-volume
  • Official drivers / firmware

Steps to follow

  1. 1

    Open cover

    Lift the top cover of the Automatic Document Feeder (ADF).

  2. 2

    Remove paper

    Gently remove any jammed paper fragments without forcing the mechanism.

  3. 3

    Clean rollers

    Wipe the feed rollers with a soft, lint-free cloth dampened with isopropyl alcohol.

Frequently asked questions

This error occurs when the internal sensors detect paper debris or a blockage in the ADF path.

It is not a system failure, but it prevents multi-page scanning or copying until the jam is cleared.

This model uses the TK-6325 toner series. Using original supplies helps keep the internal scanner area clean.

Regularly clean the feed rollers and ensure original documents are free of staples or paper clips.

Kyocera TASKalfa 9002i Error C0200: Troubleshooting Guide | Vimazdev