c0073bizhub 196

Konica Minolta bizhub 196 C0073 Error: Fix Guide

The Konica Minolta bizhub 196 error C0073 is a technical alert indicating an anomaly in the paper tray lift motor. This issue typically occurs when the system detects a mechanical restriction while attempting to raise the paper stack. To resolve this code, it is essential to inspect the paper tray and ensure there are no physical obstructions preventing upward movement.

0 views

Common causes

  • 1Physical obstruction by paper scraps in the tray rails.
  • 2Mechanical wear on the lift motor gear.
  • 3Failure of the paper tray upper limit sensor.
  • 4Misalignment of the lift cable tension.

Solutions

Quick Diagnosis

If the machine locks up and displays C0073 when trying to copy, confirm that the paper tray is not overloaded. Check if the lift motor makes any clicking noises or if the machine repeatedly attempts to elevate the tray without success.

Step-by-Step Solution

  1. Turn off the machine and unplug it from the power source.
  2. Completely remove the paper tray.
  3. Visually inspect the lift rails for paper debris or foreign objects.
  4. Reinstall the tray firmly and reboot the device.

Prevention and Maintenance

Clean the feed rollers with a lint-free cloth. Keep the tray area dust-free to extend the sensor's service life. Using original consumables is recommended to prevent mechanical stress on the lift system.

When to Call a Technician

If the error persists after performing these steps or if loud mechanical grinding continues, the lift motor may have internal damage. Contact a professional to test voltage levels.

Technical Data

  • Technology: Monochrome Laser
  • Speed: 19 ppm
  • Connectivity: USB 2.0
  • Feeding Capacity: 250 sheets standard
  • Compatible Consumables: TN-118 toner family
  • Recommended Use: Mid-volume offices
  • Official drivers / firmware

Steps to follow

  1. 1

    Power off

    Disconnect the device from the power outlet for 60 seconds.

  2. 2

    Tray inspection

    Remove the paper tray and check for obstructions in the lift motor area.

  3. 3

    Reboot

    Plug in and turn on the machine to see if the code clears.

Frequently asked questions

This error points to a failure in the paper tray lift mechanism, which prevents proper feeding.

It is a hardware error that blocks printing; if unresolved, the unit remains inoperable.

It uses the high-yield TN-118 toner cartridge.

Perform regular cleaning of the feed rollers every 50,000 pages.