c0071PagePro 1400W

Konica Minolta PagePro 1400W error C0071: Thermal Sensor Fix

The Konica Minolta PagePro 1400W error C0071 indicates a failure in the fuser's thermal sensor, commonly known as a thermistor.

1 views

Common causes

  • 1Sensor element failure.
  • 2Broken thermistor wiring.
  • 3Debris buildup on the sensor.
  • 4Controller port fault.

Solutions

Diagnostic Check

Printer halts during heating. If unit is cold but reports an error, the sensor is likely disconnected or open-circuited.

Step-by-Step Resolution

  1. Power off and unplug.
  2. Inspect thermistor placement.
  3. Power on after cooling.

Prevention and Maintenance

Keep the fuser area clean from dust to ensure accurate temperature sensing.

When to Call a Technician

If the thermistor is physically intact but continues reporting error C0071, the part is faulty and needs replacing.

Technical Data

Steps to follow

  1. 1

    Cold reset

    Unplug the unit to allow the sensor to detect room temperature.

  2. 2

    Inspect thermistor

    Check if the thermistor is correctly positioned and wiring is intact.

  3. 3

    Clear state

    After cooling, attempt a restart to see if the error persists.

Frequently asked questions

It signals a temperature sensor (thermistor) reporting a reading outside the valid operational range.

Usually requires replacing the thermistor if it fails to report correct temperature readings.

Ensure stable environment temperatures and keep dust away from the fuser assembly.

No, this error relates to fuser hardware and is unrelated to toner cartridges.