c0070bizhub 215

Konica Minolta bizhub 215 error C0070: Troubleshooting

The Konica Minolta bizhub 215 error C0070 is a diagnostic code for the paper feeding assembly. This error occurs when the transport motor fails to respond correctly. Solving why does my bizhub 215 show C0070 error often involves simple maintenance actions to the paper tray and sensors.

1 views

Common causes

  • 1Jammed paper obstructing the lift.
  • 2Dirty feed rollers.
  • 3Motor electrical failure.
  • 4Sensor fault.

Solutions

Diagnóstico rápido

The C0070 usually points to a mechanical bind. If the tray fails to rise, it's either an obstruction or a motor issue. Check if you have recently cleared a paper jam.

Solución paso a paso

  1. Empty: Remove the paper tray.
  2. Clear: Remove any debris or paper fragments.
  3. Clean: Wipe rollers gently.
  4. Reset: Reinsert and reboot.

Prevención y mantenimiento

Keep the paper feed clean by avoiding excessive paper dust. Clean the rollers every 6 months to ensure consistent paper pickup.

Cuándo llamar a un técnico

If the error continues, the transport motor or the sensor board may be failing.

Ficha técnica del equipo

Steps to follow

  1. 1

    Tray Check

    Remove the paper tray and check for jammed fragments.

  2. 2

    Roller Cleaning

    Clean feed rollers with a damp cloth to ensure proper grip.

  3. 3

    System Reboot

    Restart the device to clear the motor drive fault.

Frequently asked questions

The C0070 indicates a communication failure or mechanical blockage in the paper transport motor.

It is a moderate issue. Often, simply clearing paper debris resolves the problem.

Clean rollers with isopropyl alcohol periodically to prevent slipping.

Use TN-118 toner and standard weight paper to keep the feed path clean.

Konica Minolta bizhub 215 error C0070: Troubleshooting | Vimazdev