c0070bizhub 201

Fix Konica Minolta bizhub 201 error C0070: Troubleshooting

The Konica Minolta bizhub 201 error C0070 is a critical warning indicating an issue with the paper tray's lift motor. This error code usually surfaces when the sensor detects that the lift mechanism is stuck, preventing paper from feeding into the transport path. It is essential to perform a physical inspection to clear any obstructions before assuming a motor or board fault.

0 views

Common causes

  • 1Debris blockage inside the tray mechanism preventing vertical movement.
  • 2Natural gear wear-and-tear due to heavy usage cycles.
  • 3Malfunctioning lift position sensor preventing the machine from detecting the paper tray status.
  • 4Mechanical misalignment of the paper lift plate.

Solutions

Quick Diagnosis

Error C0070 is easily identified by a prompt on the display panel accompanied by a failure to pull paper. A rhythmic clicking sound coming from the tray area while the machine attempts to initialize is a strong indicator of a mechanical jam or gear wear.

Step-by-step Solution

  1. Turn off the main power switch.
  2. Carefully pull out the paper tray assembly.
  3. Inspect the lift plate inside the tray for paper remnants, clips, or foreign objects.
  4. Ensure the tray is not overloaded above the maximum fill line.
  5. Push the tray back in firmly until it clicks and restart the device.

Prevention and Maintenance

Perform monthly cleaning of the rubber feed rollers using a lint-free cloth and demineralized water. Ensure the machine is placed on a flat, vibration-free surface to maintain proper gear alignment.

When to Call a Technician

If the error persists after checking for debris, the internal lift motor or the main board sensor may have failed, requiring professional diagnosis and potential parts replacement.

Technical Specifications

  • Technology: Monochrome Laser Copier
  • Performance: 16 ppm (A4)
  • Connectivity: USB 2.0
  • Feed Capacity: 250 sheets (Main Tray)
  • Compatible Consumables: TN-114 Toner / DV-110 Developer
  • Recommended Usage: Small Office environment
  • Official Drivers / Firmware

Steps to follow

  1. 1

    Power Cycle

    Switch off the main power and unplug the device for at least 5 minutes.

  2. 2

    Tray Inspection

    Remove the paper tray and check for any debris or paper jams blocking the lift mechanism.

  3. 3

    System Reset

    Reconnect the unit and power it on to see if the error clears during the internal test.

Frequently asked questions

This code points to a lift motor failure in the paper tray, which prevents the stack from reaching the feed rollers.

It is a hardware-level error that prevents the copier from running, requiring quick troubleshooting to avoid further mechanical stress.

It uses the TN-114 toner cartridge and DV-110 developer, designed specifically for this series.

Keep the tray clean of dust, avoid overloading, and clean the feed rollers periodically.