c0070bizhub 164

Konica Minolta bizhub 164 error C0070: Technical Fix

The Konica Minolta bizhub 164 error C0070 is a critical motor failure that causes the printer to stop all functions. This error alerts you that the main drive motor is not rotating correctly, likely due to mechanical friction or an electrical signal issue. Quick professional diagnostic steps are often required to fix this hardware failure.

0 views

Common causes

  • 1Main drive motor malfunction.
  • 2Toner dust buildup clogging the rotation sensor.
  • 3Mechanical obstruction in the imaging unit.
  • 4Motor bearing failure due to long-term wear.

Solutions

Quick Diagnosis

If your copier displays the C0070 code upon startup, the drive motor is likely blocked. Listen closely for motor activity; silence or a mechanical grinding noise confirms the failure point.

Step-by-step Solution

  1. Hard Power Off: Turn off the main power switch and unplug the device for at least 5 minutes.
  2. Visual Inspection: Open the front cover and check the Imaging Unit area for loose paper or toner crusting.
  3. Restart: Power on the unit and observe if the main drive motor starts spinning.
  4. Sensor Cleanup: If available, ensure the rotation sensor is free of debris.

Prevention and Maintenance

Do not force the printer when paper jams occur. Perform preventative maintenance on the transport rollers every 20,000 copies to reduce gear strain. Using original TN-116 toner ensures that waste dust doesn't clog the internal motors or sensors.

When to Call a Technician

If the error persists after checking the imaging area, the drive motor or the DC board is likely faulty and requires expert replacement.

Technical Specifications

  • Technology: Monochrome Laser (Copier)
  • Speed: 16 copies per minute
  • Connectivity: USB 2.0
  • Input Capacity: 250 sheets
  • Compatible Toner: TN-116 cartridge
  • Recommended Use: Low-volume office environment
  • Official Drivers / Firmware

Steps to follow

  1. 1

    Hard Power Off

    Turn off the main power switch and unplug for 5 minutes.

  2. 2

    Visual Inspection

    Check that there are no paper jams in the imaging unit.

  3. 3

    Restart

    Power on the unit and listen for motor initialization sounds.

Frequently asked questions

This error code means the drive motor is either not receiving the correct signal or is physically jammed.

It is not a fire risk, but it is a critical operational failure that stops all copying functions.

It uses the TN-116 toner cartridge.

Schedule preventative maintenance for the paper transport system every 20,000 copies.

Konica Minolta bizhub 164 error C0070: Technical Fix | Vimazdev