c002fi-7180

Fujitsu fi-7180 error C002 Fix

The Fujitsu fi-7180 error C002 appears when the scanner's internal cache is overwhelmed. This usually happens during high-resolution document processing. Understanding why does the Fujitsu fi-7180 show error C002 allows operators to optimize settings, ensuring even the largest document batches process successfully without system lockups.

1 views

Common causes

  • 1Resolution too high for memory cache.
  • 2System RAM exhaustion.
  • 3Overly complex document batches.
  • 4Firmware efficiency limitations.

Solutions

Quick Diagnosis

This error occurs when the hardware capacity is pushed to its limits. If your scans are exceptionally large, the processor needs more time or lower-resolution images to maintain throughput.

Step-by-Step Solution

  1. Adjust image resolution settings to 300 DPI.
  2. Enable 'Grayscale' mode instead of full color if color depth isn't required.
  3. Free up your computer's RAM by closing unnecessary applications.
  4. Process batches of 50-80 pages to avoid buffer overload.

Prevention and Maintenance

Keep your scanner drivers and firmware up to date through the official Fujitsu support portal. Frequent firmware updates often optimize memory utilization.

When to Call a Technician

If the error persists even for a single black-and-white page scan, the main board memory is likely faulty and requires professional servicing.

Technical Specifications

  • Technology: Document Scanner
  • Speed: 80 ppm
  • Connectivity: USB 3.0
  • Capacity: 80 sheets
  • Consumable: PA03670 Kit
  • Usage: Archives
  • Official Drivers / Firmware

Steps to follow

  1. 1

    Adjust Resolution

    Reduce the DPI settings to decrease the image data load.

  2. 2

    Clear Resources

    Close intensive background applications on the host computer.

  3. 3

    Check Firmware

    Ensure your scanner firmware is updated to the latest available version.

Frequently asked questions

The C002 error indicates that the scanner's internal buffer/memory is exhausted by complex or high-DPI scans.

No, it's typically a software and data size issue rather than a broken scanner component.

Always stick with the original Fujitsu PA03670 roller kit for efficient feeding.

Use batch splitting for large documents or lower the resolution to 300 DPI.