c-5351bizhub 307

Error C-5351 Konica Minolta bizhub 307: Fan Failure

The Konica Minolta bizhub 307 error C-5351 indicates a failure in the system cooling fan. When the printer detects insufficient airflow or that the fan is not spinning at the configured speed, it halts operation to protect sensitive internal components. Ensuring external air vents are clear is the first step.

1 views

Common causes

  • 1Fan blocked by dust buildup.
  • 2Fan hall sensor failure.
  • 3Disconnected fan power connector.
  • 4Fan motor end-of-life.

Solutions

Quick Diagnosis

If you hear a weird noise at startup or notice the unit is hot, the C-5351 is likely. Check vents for obstructions.

Step-by-step fix

  1. Power off the device.
  2. Clean rear vents with compressed air.
  3. Check for loose cables blocking the fan.
  4. Reboot and listen for the fan startup sound.

Prevention

Keep 20cm clearance at the rear. Vacuum vents regularly to prevent dust accumulation.

When to call a pro

If the fan doesn't spin after cleaning, the motor has failed and requires replacement.

Technical Data

  • Technology: Monochrome Laser
  • Speed: 30 ppm
  • Connectivity: USB 2.0 / LAN
  • Consumables: TN-323 Toner
  • Usage: Corporate environments
  • Official Drivers / Firmware

Steps to follow

  1. 1

    External inspection

    Check rear vents for dust.

  2. 2

    Spin test

    Ensure no blockages exist.

  3. 3

    Restart

    Power on and verify fan operation.

Frequently asked questions

Sensor detected insufficient fan speed.

No, the printer locks to prevent heat damage.

TN-323 Toner.

Every 3 months.

Error C-5351 Konica Minolta bizhub 307: Fan Failure | Vimazdev