c-5152bizhub 227

Konica Minolta bizhub 227 error c-5152: Solution Guide

The Konica Minolta bizhub 227 error c-5152 is a system code indicating a malfunction in the paper tray lift mechanism. This error arises when the device cannot correctly position the tray, preventing steady paper feeding. It is crucial to verify that no physical obstructions exist before checking mechanical components.

1 views

Common causes

  • 1Mechanical obstruction by paper debris.
  • 2Lift motor failure.
  • 3Tray position sensor misalignment.
  • 4Worn gears in the lower paper tray.

Solutions

Quick Diagnosis

Error c-5152 indicates that the tray sensor or motor is unresponsive. Check if the paper tray has smooth movement or if it stops abruptly when attempting to lift.

Step-by-step Solution

  1. Remove tray: Pull out the affected paper tray completely.
  2. Inspect rollers: Ensure no paper scraps are blocking the mechanism.
  3. Clean sensors: Wipe the tray presence sensors with a dry cloth.
  4. Restart: Turn off the device and power it back up to retry lifting.

Prevention and Maintenance

Avoid overloading trays above the marked limit. Keep paper guides adjusted to prevent forcing the motor.

When to Call a Technician

If the motor makes constant clicking sounds while lifting, the internal gear may be broken and require professional service.

Technical Specifications

  • Technology: Monochrome laser
  • Paper capacity: 1 x 500 sheet tray
  • Connectivity: USB 2.0 and LAN
  • Compatible Consumable: TN-323
  • Recommended Use: High-volume printing
  • Official drivers / firmware
Konica Minolta bizhub 227 error c-5152: Solution Guide | Vimazdev