c-4801accuriolabel-230

Konica Minolta AccurioLabel 230 Error C-4801: Technical Fix

The Konica Minolta AccurioLabel 230 error C-4801 refers to a failure in the registration mark sensor for label material. This error stops the printing process to prevent serious misalignments during production work. Here is how to inspect the sensor zone.

1 views

Common causes

  • 1Accumulated dust on the optical registration sensor.
  • 2Label material with inadequate transparency or reflectivity.
  • 3Sensor misalignment following a media jam.
  • 4Failure of the sensor's light-emitting component.

Solutions

Quick Diagnosis

If the equipment stops suddenly and displays error C-4801, it is likely that the sensor light is not correctly detecting the gap or black mark between labels due to debris.

Step-by-Step Solution

  1. Open the paper path cover and locate the label registration sensor.
  2. Carefully clean the sensor surface with a soft cloth lightly dampened with an optical device cleaner.
  3. Ensure the material used is compatible with the sensor (check if the detection threshold needs adjustment).
  4. Restart the device so the sensor runs its initialization sequence again.

Prevention and Maintenance

Perform periodic cleaning of the reading sensors if working with materials that leave residues (like thermal adhesives). Keep the feed rollers free of paper scraps.

When to Call a Technician

If the sensor is clean and the error persists, electronic calibration of the optical unit by technical personnel may be required.

Technical Specifications

  • Technology: Digital electrography (Toner).
  • Speed: High efficiency for labels.
  • Connectivity: Industrial standard.
  • Capacity: Continuous high-volume production.
  • Compatible Consumables: Accurio series CMYK toner.
  • Recommended Use: Label converting industry.
  • Drivers / Official Firmware
Konica Minolta AccurioLabel 230 Error C-4801: Technical Fix | Vimazdev