c-4501bizhub C280i

Konica Minolta bizhub C280i error C-4501: Laser Unit Fault

The Konica Minolta bizhub C280i error C-4501 points to a critical issue with the laser scanning unit (LSU). Users often ask why does bizhub C280i show error C-4501, which relates to the laser motor not spinning at the correct speed. This error usually requires expert technical support to resolve.

1 views

Common causes

  • 1Laser motor rotation failure.
  • 2Communication error with the main board.
  • 3Dust blockage on the laser path.
  • 4LSU electronic component fatigue.

Solutions

Diagnóstico rápido

The C-4501 error prevents any printing. If the display shows this code, the laser motor has failed to synchronize.

Solución paso a paso

  1. Power off: Turn off from the main switch.
  2. Cool down: Allow the machine to sit for 15 minutes.
  3. Power on: Restart to attempt a re-sync.
  4. Technical aid: Contact a certified service engineer if the code persists.

Prevención y mantenimiento

Keep the printer in a clean environment to avoid dust affecting the laser unit. Regularly change internal air filters.

Cuándo llamar a un técnico

As this involves internal laser optics, professional service is mandatory.

Ficha técnica del equipo

  • Technology: Color Laser MFP
  • Speed: 28 ppm
  • Connectivity: USB, LAN, NFC
  • Capacity: Up to 3650 sheets
  • Supplies: TN-221 (CMYK)
  • Recommended use: Corporate office
  • Drivers / official firmware

Steps to follow

  1. 1

    Power off

    Turn off from the main switch.

  2. 2

    Cool down

    Allow to sit for 15 minutes.

  3. 3

    Power on

    Attempt a restart.

  4. 4

    Call support

    Contact a service engineer.

Frequently asked questions

It signals a failure in the laser scanning unit.

Yes, printing is suspended.

Use genuine TN-221.

Professional periodic checks.