c-4501AccurioPress C4080

Fix Konica Minolta AccurioPress C4080 error C-4501

The Konica Minolta AccurioPress C4080 error C-4501 signifies a critical fault in the laser unit (LSU). It occurs when the laser polygon motor fails to rotate correctly, rendering the machine incapable of image formation.

1 views

Common causes

  • 1Motor Failure: Laser polygon motor speed fault.
  • 2Voltage issues: Unstable electrical supply.
  • 3Wear and Tear: Natural component expiration.

Solutions

Quick Diagnosis

The C-4501 is easily identified as it prevents the printer from becoming ready. If you hear no movement from the laser unit, the component likely requires professional attention.

Step-by-step Solution

  1. Shut down the machine and unplug it for 5 minutes to discharge internal power.
  2. Verify ambient temperatures are within specified ranges.
  3. Power up again to check if the error was a transient synchronization issue.

Prevention and Maintenance

Use high-quality power conditioning to protect sensitive components like the laser motor. Schedule annual maintenance with a certified technician.

When to Call a Technician

This is a hardware fault requiring a technician to replace or repair the laser unit. Do not attempt to open the laser casing.

Technical Specifications

  • Technology: High-speed laser.
  • Speed: 81 ppm.
  • Connectivity: Integrated Gigabit LAN.
  • Consumable: Genuine TN-622 toner series.
  • Maintenance: Professional annual service required.
  • Drivers / Firmware Support

Steps to follow

  1. 1

    Full Shutdown

    Switch off the main power and unplug for 5 minutes.

  2. 2

    Check Environment

    Ensure room temperature is between 15-30°C.

  3. 3

    Reboot

    Restart the system to see if the error clears.

Frequently asked questions

This code points to a laser polygon motor failure, which prevents the laser beam from writing images properly.

Yes, it is a hardware-level failure that renders the printer unable to produce images until the laser component is serviced.

Always stick with genuine TN-622 series toners to avoid electrical interference and extend machine life.

Use a professional-grade voltage stabilizer and avoid installing the machine in extreme temperatures.